Hand tool - Neolithic, Stone, Flint | Britannica (2024)

Neolithic tools

inhand toolinEarly history of hand tools

printPrint

Please select which sections you would like to print:

verifiedCite

While every effort has been made to follow citation style rules, there may be some discrepancies.Please refer to the appropriate style manual or other sources if you have any questions.

Select Citation Style

Feedback

Thank you for your feedback

Our editors will review what you’ve submitted and determine whether to revise the article.

External Websites

Written by

Richard S. Hartenberg Professor of Mechanical Engineering, Northwestern University, Evanston, Illinois, 1956–75. Coauthor of Kinematic Synthesis of Linkages.

Richard S. Hartenberg,

Joseph A. McGeough Regius Professor of Engineering, University of Edinburgh. Author of Advanced Methods of Machining.

Joseph A. McGeoughAll

Fact-checked by

The Editors of Encyclopaedia Britannica Encyclopaedia Britannica's editors oversee subject areas in which they have extensive knowledge, whether from years of experience gained by working on that content or via study for an advanced degree. They write new content and verify and edit content received from contributors.

The Editors of Encyclopaedia Britannica

Article History

Related Topics:
cutlery
saw
wrench
flake tool
vise

See all related content

The Neolithic Period, or New Stone Age, the age of the ground tool, is defined by the advent around 7000 bce of ground and polished celts (ax and adz heads) as well as similarly treated chisels and gouges, often made of such stones as jadeite, diorite, or schist, all harder than flint. A ground tool is one that was chipped to rough shape in the old manner and then rubbed on or with a coarse abrasive rock to remove the chip scars either from the entire surface or around the working edge. Polishing was a last step, a final grinding with fine abrasive. That such a tool is pleasing to the eye is incidental; the real worth of the smoothing lay in the even cutting edge, superior strength, and better handling. The new ax would sink deeper for a given blow while delivering a clean and broad cut; its smooth bit, more shock resistant than the former flaked edge, had less tendency to wedge in a cut.

Although the polished rock tool is the index to the Neolithic Period, it may be noted that the ice sheets were receding and climatic conditions were assisting the conversion of hunters into herdsmen. The new, relatively sedentary life spawned further inventions, such as pottery. From the standpoint of tools, the potter’s kiln and art were necessary steps to metals, for a modification of the kiln probably provided the high temperatures and equipment needed for metalworking, first for melting native metals and later for the smelting process that gave rise to a wealth of metals, several of which proved to be superior materials for tools.

The polished Neolithic ax, a heavy implement, was in sharp contrast to the delicate small-rock work of the last stages of the Paleolithic Period and was a reversal of the traditions of products that had yielded ever more lineal feet of cutting edge per pound of stone. The ax and its companion adz met the need to clear land as agriculture developed. An efficient tree-cutting tool was indispensable for the slash-and-burn agriculture then devised. Trees were either cut down or killed by ringing them with an ax; the debris was burned over, with the ashes conferring a slight enrichment of the stump-filled field. The soil was next scarified with sticks or stone-headed hoes resembling the adz to prepare it for seeding among the stumps. Without manuring or other treatment, the land was exhausted after a few years, necessitating a repetition of the clearing process elsewhere. The consequence was a shifting settlement pattern, with a good ax needed not only for felling trees but also for working timber for settlement.

Wood began its broad role in human life with the ground and polished tools of the Neolithic. Home and fire, furniture and utensils, cradle and coffin were products of the ax, adz, and chisel, which could fashion wood intricately and with precision. This kit of tools turned wood into an almost universal building material, for a host of new things was now possible, such as dugout canoes of oak, paddles and framing for hide-covered boats, sledges, skis, wooden platters and ladles, as well as other household gear. Mortise and tenon joints were invented for the structural framing of substantial habitations. Some of the gabled houses were up to 30 metres (100 feet) long and 20 metres (66 feet) wide and are believed to have served as both granaries and living quarters for perhaps 20 people comprising several families.

In a revealing experiment, 4,000-year-old polished rock axes, furnished by the Danish National Museum and carrying the sharpness left after their last use 4,000 years ago, were fitted with ash handles modeled after that of a Neolithic hafted ax preserved in a bog, giving the ax an overall length of nearly 63 cm (25 inches). (A modern steel felling ax has a 91-cm [36-inch] handle.) When these were used in a Danish forest, it was soon found that the violent action of the modern technique of swinging a steel ax and putting shoulder and weight behind the blade to give long and powerful blows was disastrous, either ruining the edge or breaking the blade. Proper handling meant short quick strokes that chipped at the tree, the body action being constrained to mainly elbow and wrist motion. After getting into form, the men found it possible to fell an oak tree more than 0.3 metre (1 foot) in diameter in half an hour or a pine 61 cm (2 feet) in diameter in less than 20 minutes. One-eighth acre (600 square yards, or 0.05 hectare) of silver birch forest were cleared by three men in four hours. One axhead cut down more than 100 trees on its original (old) sharpening. It was concluded that Neolithic people and their ground flint axes had no great difficulties in making large clearings in the forest for the purposes of cultivation. It may also be remarked that it was less trouble to clear the forest than to break the age-old and tough sod of the plains.

The Neolithic farmers of northern Europe, with their practice of deforestation for agriculture, were completely dependent upon polished axes. This created a heavy demand for good rock that depleted local sources and resulted in flint mining in well-endowed locations in what are now England, Belgium, the Netherlands, France, Denmark, Sweden, Poland, Portugal, Sicily, and Egypt. Often more than just mining, these operations were ax factories where flints were shaped into rough form by chipping at the pithead and then traded. Grinding and polishing were done by the consumer.

An idea of the magnitude of such a mining enterprise is offered by the well-explored workings known as Grimes Graves, about 130 km (80 miles) northeast of London. The site covers about 34 acres (14 hectares) and includes both opencast workings and 12.2-metre- (40-foot) deep shafts with radiating galleries that exploited the flint deposit laid down as a floor under chalk beds. Excavation was probably by wooden shovel (a product of the polished ax and chisel) or possibly the shoulder blades of oxen. It is estimated that 50,000 picks made of red-deer antlers were used during the 600 years of activity in the mine, which began about 2300 bce.

A last innovation of the Neolithic was the augmentation of the two older techniques of working stone, chipping (or flaking) and grinding, by a third, the pecking, or crumbling, method. In this procedure a point of the rock being worked was bruised by a hard hammerstone, the struck points crumbling into powder under relatively light but rapidly delivered blows. This technique allowed the manufacture of tools from numerous varieties of appropriate but nonflaking rock and the production of hollow ware, such as querns for grinding grain, mortars, and bowls. It also could be applied to flakable stone; such a stone, after having been roughed out by flaking, was pecked to level the ridges between flake scars before grinding and polishing.

Stone tools maintained themselves during the Metal Age, yielding only slowly to the new material, which was expensive and the product of special skills. The copper and bronze tools and weapons for hunting, warfare, husbandry, and domestic use that constitute impressive displays in museums were rare luxuries. Even the much more abundant iron, which overtook and replaced copper and bronze articles, was available only sparingly for many centuries.

Hand tool - Neolithic, Stone, Flint | Britannica (2024)
Top Articles
Latest Posts
Recommended Articles
Article information

Author: Clemencia Bogisich Ret

Last Updated:

Views: 5784

Rating: 5 / 5 (80 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Clemencia Bogisich Ret

Birthday: 2001-07-17

Address: Suite 794 53887 Geri Spring, West Cristentown, KY 54855

Phone: +5934435460663

Job: Central Hospitality Director

Hobby: Yoga, Electronics, Rafting, Lockpicking, Inline skating, Puzzles, scrapbook

Introduction: My name is Clemencia Bogisich Ret, I am a super, outstanding, graceful, friendly, vast, comfortable, agreeable person who loves writing and wants to share my knowledge and understanding with you.